Pesticides

Test Results anyone? THC, THCA, Formula...

States that have legalized in cannabis require testing for potency and contaminants in cannabis, and lab-testing cannabis is quickly becoming an important part of the industry. The tests for pesticides, mold, contamination, etc. don’t require any new or special analytical techniques and are part of standard practice for other agricultural products as well. With the right lab equipment, chemists can measure cannabinoids to a certain degree of precision if they do it right, but the lack of a standardized way of looking at the data has everyone confused.

The subject of this issue is Δ9-tetrahydrocannabinolic acid (THCA), which occurs naturally in the plant. THCA needs to be heated so it changes into THC, the active form that gets you high. All cannabinoids occur naturally in their acid forms, that’s just how their enzymes make them. The difference between THCA and THC is a carboxy group. Upon smoking, cooking or vaping heat gets rid of the carboxy so THCA gives of CO2, losing about 12% of its weight in the process. Why does this matter for lab testing? Because THCA is heavier than THC, and lab results are given in percent mass.

The root of the confusion is the fact that different lab techniques give inherently different potency values. Depending on the lab, the analysis machine might use one of two separation methods: gas chromatography (GC) or liquid chromatography (LC).

GC happens at high temperatures, enough to completely decarboxylate all the cannabinoids in the mixture. The oven it happens in decarboxylates THCA before passing on to the detector, so it only picks up THC. This makes GC almost useless for testing edibles, because you need to be able to tell the difference between orally inactive THCA and active THC. Furthermore, decarboxylation happens incompletely at those high temperatures in the injector port, conserving no more than 70% of THCA, according to one study.

Liquid chromatography happens at room temperature and does not decarboxylate any cannabinoids, giving separate values for THCA and THC, which are always both present. These results need to be interpreted correctly, and hold hidden information about how the sample was handled and temperatures it has been exposed to.

Let’s look at an example. Given one lab result you could get three THC potency readings depending on how you read it, but only one method really stands to reason. Consider a made up lab result of Hypothetical OG that used LC, say it has 22.32% percent mass of THCA and 2.41% percent mass THC (active THC).

If you just look at the THCA value, you might think it has 22.32% THC. If you add the THC value to that, you might think this strain has 24.74% THC. Neither of these values is correct.

To get a real potency value you need to consider both THCA and THC, but with a correction factor for THCA before you add in THC. To calculate THCTOTAL:

 

THCtotal = (%THCA) x 0.877 + (%THC)

 

0.877 is the molecular mass (mm) of THC divided by that of THCA; this factor boils it down to a simple formula: take 87.7% of the value for THCA, then add on the value for THC. This formula also holds true for finding the active CBD content (CBD TOTAL) because CBD and THC have the exact same mm. Therefore the correct value of THC TOTAL for Hypothetical OG is 21.98%, the weighted average of THCA and THC.

To get a real measure of the potency of a strain of pot, you need to look at THC TOTAL. This is because the relative amounts of THCA and THC depend on the amount of heat the flower, dry bud or extract has been exposed to. Since this is always different, lab testing needs to see past this variable.

Since GC doesn’t work for edibles, many labs are switching to LC to test for edibles. If you know you’re looking at a lab test that used LC, you’ll need to use this formula to get a consistent value of THC TOTAL.

When looking at lab results, make sure to take this into consideration. Be suspicious of lab results that just give you one number for %THC. If the lab used GC, you won’t have this issue at all. The %THC given from a GC machine roughly reflects THC TOTAL.

Read the original article from High Times HERE.

Clean Green Certified!

We are now Clean Green Certified!!

Here at Gorge Greenery we never stop striving for the best, and are one of the few Clean Green Certified Dispensaries. From sustainable labels and packaging, reclaimed wood and recycled furnishing, to Clean Green Certified cannabis and gardens with extended pesticide screening, we are always striving to protect consumers as well as our environment.

Clean Green Certified is the number one certifier nation-wide for cannabis cultivated using sustainable, natural organically-based and biodynamic practices. Legally, marijuana cannot be called organic — no matter how environmentally friendly the cultivation practices used to grow it — because the term is federally regulated and the USDA does not recognize cannabis as a legitimate agricultural crop. The Clean Green Certified program was created in 2004 as a way to regulate legal cannabis-products that called themselves "organic." Consumers can rest assured when they buy a Clean Green Certified cannabis product that it has met all of the requirements of the rigorous program.

Modeled on national and international sustainability,  organic and biodynamic program standards, the Clean Green program requires on-site inspections. Clean Green Certified goes further that the USDA organic in some areas, requiring more strict regulations on pesticide testing for all operators and each cannabis operation must put into place a carbon footprint reduction plan, water conservation measures and fair labor practices.

Clean Green Certified has a certification specifically for cannabis processors and handlers. Whether it be a store-front or a cannabis concentrate company, certification audits the processor/handler's ability to keep Clean Green cannabis separate from cannabis grown conventionally. A consumer can have greater confidence when buying cannabis or a cannabis product from a Clean Green Certified outlet that it was grown fair-trade and sustainably, without the use of synthetic pesticides. 

 

Check out the Clean Green website here: www.cleangreencert.org

"If you have to use pesticides...you're doing it wrong."

Oregon on Monday issued a list of more than 250 pesticides cannabis growers may be able to use on their crops. The list represents the first clear guidance from Oregon agriculture officials on what chemicals the state's marijuana industry may use to defeat mites, mold, mildew and other common pests and problems. Top state agriculture officials made clear that the list is a "starting spot" for marijuana growers, who still have to follow pesticide labels. Lauren Henderson, assistant director of the agency, said regulators combed through more than 12,000 pesticides registered with the state to see which had labels broad enough to include cannabis. Ultimately, the agency came up with about 250 products. The list will be reviewed quarterly, said Henderson.

Aviv Hadar, an owner of Oregrown, a dispensary in downtown Bend, said growers shouldn't use pesticides at all.

"If you have to use pesticides," he said in a text message to The Oregonian/OregonLive, "you're doing it wrong."

But it's clear many do. Though Oregon mandates pesticide testing for marijuana, a combination of lax state rules, inconsistent lab practices and inaccurate test results has allowed pesticide-laced products to enter the medical marijuana market, an investigation last year by The Oregonian/OregonLive found.

Rodger Voelker, a chemist at OG Analytical, a marijuana testing lab in Eugene, said Oregon's list doesn't include some of the more common pesticides he sees in cannabis that comes through his lab.

He also said growers will have to figure out how to safely apply the chemicals on the state's list. Some are included in state-mandated lab testing. That means growers may be able to apply the chemical to their crop, but the product will have to test below a certain level before it lands on store shelves.

Click HERE to read the full article.

 

Trust your Bud- Gorge Greenery is Pesticide Free!

While this article was released in June earlier this year, it's come to our attention that many medical patients and recreational users alike are unaware of the serious risk of pesticides in Cannabis flower and products. Here at Gorge Greenery, we carry Clean Green Certified gardens and send everything out to OG Analytical (one of the trusted labs used in this study), for the most comprehensive pesticide screening capabilities in Oregon to ensure clean product every time.

"Dab Society Dutch Treat, a potent cannabis extract sold to medical marijuana patients, sailed through state-mandated pesticide testing. The results were printed on the label, backed by an official report. Workers at a Southeast Portland dispensary were happy to share the lab certificate. All you had to do was ask.

But, in fact, two laboratories commissioned by The Oregonian/OregonLive found pesticides in the same sample of Dutch Treat at levels above what the state allows.

It wasn’t an isolated case.

A combination of lax state rules, inconsistent lab practices and inaccurate test results has allowed pesticide-laced products to enter the medical marijuana market, The Oregonian/OregonLive has found.

Marijuana that fails a pesticide screen is not supposed to be sold to patients. But two other cannabis products in addition to Dutch Treat also tested above acceptable levels for pesticides.

The Oregonian/OregonLive shopped at Oregon dispensaries, bought cannabis that had passed pesticide tests and sent the samples to independent labs for further screening. Two labs performed the analysis: OG Analytical, a marijuana testing lab in Eugene, and Pacific Agricultural Laboratory, a Portland lab that specializes in detecting pesticides on foods and agricultural commodities. Both confirmed in blind testing the presence of pesticides that should have triggered red flags from previous labs."

Read the full article from The Oregonian/OregonLive HERE.